Entering edit mode
6.7 years ago
marongiu.luigi
▴
730
Dear all,
I am trying to install Bio::DB::Sam in order to have CREST running. I installed samtools with apt and the solutions in this post did not work because I got an error in compiling samtools (and anyway, it is already installed). Since he first problem was the root access, I replicated with 'sudo'; although there was more processing, the outcome was the same. I also tried with 'force' but with no success.
I found that the libraries bam.h and libbam.a are in /home/gigiux/src/dwgsim/samtools since they were present in the tool dwgsim otherwise there are no other. Maybe this is the problem.
From the build.log file there are several modules missing, suc as Data::Stag. Alas I cannot fit build.log here because it will overflow the word count. Shouldn't they be installed when I installed BioPerl (which I have done with CPAN)?
How can I go ahead?
Thank you
This is the output of the installation:
$ cpanm Bio::DB::Sam
!
! Can't write to /usr/local/share/perl/5.26.0 and /usr/local/bin: Installing modules to /home/gigiux/perl5
! To turn off this warning, you have to do one of the following:
! - run me as a root or with --sudo option (to install to /usr/local/share/perl/5.26.0 and /usr/local/bin)
! - Configure local::lib in your existing shell to set PERL_MM_OPT etc.
! - Install local::lib by running the following commands
!
! cpanm --local-lib=~/perl5 local::lib && eval $(perl -I ~/perl5/lib/perl5/ -Mlocal::lib)
!
--> Working on Bio::DB::Sam
Fetching http://www.cpan.org/authors/id/L/LD/LDS/Bio-SamTools-1.43.tar.gz ... OK
Configuring Bio-SamTools-1.43 ... Please enter the location of the bam.h and compiled libbam.a files: /home/gigiux/src/dwgsim/samtools
OK
Building and testing Bio-SamTools-1.43 ... FAIL
! Installing Bio::DB::Sam failed. See /home/gigiux/.cpanm/work/1523348725.18948/build.log for details. Retry with --force to force install it.
$ cpanm Bio::DB::Sam --force
!
! Can't write to /usr/local/share/perl/5.26.0 and /usr/local/bin: Installing modules to /home/gigiux/perl5
! To turn off this warning, you have to do one of the following:
! - run me as a root or with --sudo option (to install to /usr/local/share/perl/5.26.0 and /usr/local/bin)
! - Configure local::lib in your existing shell to set PERL_MM_OPT etc.
! - Install local::lib by running the following commands
!
! cpanm --local-lib=~/perl5 local::lib && eval $(perl -I ~/perl5/lib/perl5/ -Mlocal::lib)
!
--> Working on Bio::DB::Sam
Fetching http://www.cpan.org/authors/id/L/LD/LDS/Bio-SamTools-1.43.tar.gz ... OK
Configuring Bio-SamTools-1.43 ... Please enter the location of the bam.h and compiled libbam.a files: /home/gigiux/src/dwgsim/samtools
OK
Building and testing Bio-SamTools-1.43 ... FAIL
! Installing Bio::DB::Sam failed. See /home/gigiux/.cpanm/work/1523348745.18997/build.log for details. Retry with --force to force install it.
$ sudo cpanm Bio::DB::Sam --force
--> Working on Bio::DB::Sam
Fetching http://www.cpan.org/authors/id/L/LD/LDS/Bio-SamTools-1.43.tar.gz ... OK
Configuring Bio-SamTools-1.43 ... Please enter the location of the bam.h and compiled libbam.a files: /home/gigiux/src/dwgsim/samtools
OK
==> Found dependencies: Bio::Root::Version
--> Working on Bio::Root::Version
Fetching http://www.cpan.org/authors/id/C/CJ/CJFIELDS/BioPerl-1.007002.tar.gz ... OK
Configuring BioPerl-1.007002 ... OK
==> Found dependencies: Test::Most, Data::Stag
--> Working on Test::Most
Fetching http://www.cpan.org/authors/id/O/OV/OVID/Test-Most-0.35.tar.gz ... OK
Configuring Test-Most-0.35 ... OK
==> Found dependencies: Test::Exception, Test::Deep, Exception::Class, Test::Differences, Test::Warn
--> Working on Test::Exception
Fetching http://www.cpan.org/authors/id/E/EX/EXODIST/Test-Exception-0.43.tar.gz ... OK
Configuring Test-Exception-0.43 ... OK
==> Found dependencies: Sub::Uplevel
--> Working on Sub::Uplevel
Fetching http://www.cpan.org/authors/id/D/DA/DAGOLDEN/Sub-Uplevel-0.2800.tar.gz ... OK
Configuring Sub-Uplevel-0.2800 ... OK
Building and testing Sub-Uplevel-0.2800 ... OK
Successfully installed Sub-Uplevel-0.2800
Building and testing Test-Exception-0.43 ... OK
Successfully installed Test-Exception-0.43
--> Working on Test::Deep
Fetching http://www.cpan.org/authors/id/R/RJ/RJBS/Test-Deep-1.127.tar.gz ... OK
Configuring Test-Deep-1.127 ... OK
Building and testing Test-Deep-1.127 ... OK
Successfully installed Test-Deep-1.127
--> Working on Exception::Class
Fetching http://www.cpan.org/authors/id/D/DR/DROLSKY/Exception-Class-1.44.tar.gz ... OK
Configuring Exception-Class-1.44 ... OK
==> Found dependencies: Devel::StackTrace, Class::Data::Inheritable
--> Working on Devel::StackTrace
Fetching http://www.cpan.org/authors/id/D/DR/DROLSKY/Devel-StackTrace-2.03.tar.gz ... OK
Configuring Devel-StackTrace-2.03 ... OK
Building and testing Devel-StackTrace-2.03 ... OK
Successfully installed Devel-StackTrace-2.03
--> Working on Class::Data::Inheritable
Fetching http://www.cpan.org/authors/id/T/TM/TMTM/Class-Data-Inheritable-0.08.tar.gz ... OK
Configuring Class-Data-Inheritable-0.08 ... OK
Building and testing Class-Data-Inheritable-0.08 ... OK
Successfully installed Class-Data-Inheritable-0.08
Building and testing Exception-Class-1.44 ... OK
Successfully installed Exception-Class-1.44
--> Working on Test::Differences
Fetching http://www.cpan.org/authors/id/D/DC/DCANTRELL/Test-Differences-0.64.tar.gz ... OK
Configuring Test-Differences-0.64 ... OK
==> Found dependencies: Text::Diff
--> Working on Text::Diff
Fetching http://www.cpan.org/authors/id/N/NE/NEILB/Text-Diff-1.45.tar.gz ... OK
Configuring Text-Diff-1.45 ... OK
Building and testing Text-Diff-1.45 ... OK
Successfully installed Text-Diff-1.45
Building and testing Test-Differences-0.64 ... OK
Successfully installed Test-Differences-0.64
--> Working on Test::Warn
Fetching http://www.cpan.org/authors/id/B/BI/BIGJ/Test-Warn-0.32.tar.gz ... OK
Configuring Test-Warn-0.32 ... OK
Building and testing Test-Warn-0.32 ... OK
Successfully installed Test-Warn-0.32
Building and testing Test-Most-0.35 ... OK
Successfully installed Test-Most-0.35
--> Working on Data::Stag
Fetching http://www.cpan.org/authors/id/C/CM/CMUNGALL/Data-Stag-0.14.tar.gz ... OK
Configuring Data-Stag-0.14 ... OK
Building and testing Data-Stag-0.14 ... OK
Successfully installed Data-Stag-0.14
Building and testing BioPerl-1.007002 ... OK
Successfully installed BioPerl-1.007002
Building and testing Bio-SamTools-1.43 ... FAIL
! Installing Bio::DB::Sam failed. See /home/gigiux/.cpanm/work/1523349040.19234/build.log for details. Retry with --force to force install it.
12 distributions installed
$ whereis samtools
samtools: /usr/bin/samtools /usr/bin/samtools.pl /usr/local/bin/samtools /usr/local/bin/samtools.pl /usr/share/man/man1/samtools.1.gz
Is this tool expecting to find an old version of samtools (v.0.1.19)?
the samtools i have installed is version 1.6
So what about
/home/gigiux/.cpanm/work/1523349040.19234/build.log?marongiu.luigi : Use pastebin for long log entries that don't fit here.
I wanted to add it to the post, but it is too big. Maybe as an attachment but I don't know how to send it. Anyway it has a list of modules missing, such as Bio::Root::Version, Data::Stag, Test::Most, Algorithm::Munkres, Array::Compare, Bio::Phylo, Convert::Binary, GD, Graphand many many more. If so many modules are missing, what is the point of installing BioPerl in the first place?
Did you read
/home/gigiux/.cpanm/work/1523349040.19234/build.log? It should have further information on why the build fails.edit:
see previous thread on the same issue: bio::db::sam installation errorYou already have seen it.